The Flexospan Standing Seam 18 metal roofing panel is designed for both new and retrofit projects. With a seam of 2 5/8" or 2.625", an overall coverage area of 18" and stiffening ribs as standard, the FSS-18 is especially useful where strength over open purlins is required or where there are long runs with limited openings. With concealed clip and fastener systems, there are fewer roofing penetrations, reducing the possibility of leaks.
22 & 24 ga
15 Standard Colors:
Non-standard colors and may be ordered with minimum quantity restrictions.
FSS-18 Profile (2 panels joined):
The FSS-18 has been UL 90 tested for uplift. It's a good choice when both strength and economy are required. Pre-formed profile closures are available for ridge and high eave conditions, to match the color and finish of the panels.
Flexospan's FSS-18 Standing Seam Roof is designed for both the retrofit and new construction markets. Economy, strength, ease of installation, and weather tightness are the major considerations in the system design. With millions of square feet of roofing that need replaced, Flexospan offers a system which, when used in combination with various insulations and sub-framing systems, can make any re-roofing project a success. With the concealed clip and fastener system, roof penetrations are kept at a minimum, greatly reducing the possibility of leaks.
Flexospan - LEED Points Product Data Sheet LEED Green Building Rating System
New Construction & Major Renovations (LEED) Version v3, April 27, 2009
The following is provided as general information to assist your LEED project team in better understanding Flexospan products and the characteristics of our materials that may contribute towards earning LEED certification of your project. Because each project has unique circumstances, it is the responsibility of your project team to determine if your project is eligible for certification and whether LEED points will be available for the Flexospan product supplied to your particular project.