Call Toll Free 800-245-0396

Type B Roof Deck Load Table - Wide Flange Up

Uniform Total Load in Pounds Per Square Foot (Dead and Live)

Span	Ga	Design Thickness	5	5.5	6	6.5	7	7.5	8	8.5	9	9.5	10
1	22	.0295	96	75	60	49	41	35	31
	20	.0358	120	93	74	60	50	43	37	32
	18	.0474	166	127	100	81	67	56	48	42	37	33
	16	.0600		158	124	100	82	68	58	50	44	39	35
2	22	.0295	103	86	72	62	53	46	41	36	32
	20	.0358	127	105	88	75	65	57	50	44	40	36	32
	18	.0474	169	140	118	101	87	76	67	59	53	48	43
	16	.0600		177	149	127	110	96	84	75	67	60	54
3	22	.0295	128	107	90	77	66	58	50	43	38	34	30
	20	.0358	157	130	110	94	81	71	61	53	46	40	36
	18	.0474		174	147	125	108	95	82	70	60	53	47
	16	.0600			185	158	137	119	101	86	74	64	57

NOTES:  1. Load tables are calculated using section properties based on the steel design

thickness shown in the Steel Deck Institute (SDI) design manual.

2. Loads shown in the shaded areas are governed by the live load deflection

not in excess of L/240 of the span.  A dead load of 10 psi has been included

Contact your design professional for proper use of Flexospan load tables