       
Wall Panels - Pre Engineered
Buildings
Click on the items below to access additional information for each panel.
|
|
Flexbeam - Wall Panel and Through Fastened Roofing
 |
Flexospan's Flexbeam roofing and wall panel is economical, strong and aesthetically pleasing. It has a trapezoidal profile,
important for many architectural applications. The standard Flexbeam panel is 38 7/8" overall, with a 36" coverage. |
|
Flexrib - Wall Panel and Through Fastened Roofing
 |
Flexospan's Flexrib roofing and wall panel combines strength with a deep, wide panel for a clean, bold look. It's easy to install and lasts for
years. |
|
Vertarib - Wall Panel
 |
Flexospan's Vertarib wall panel combines form and function. The recessed channels on this wall panel house semi-concealed fasteners, creating a
smooth, flat appearance. |
|
1/2" - Wall Panel and Fastened Roofing
 |
The Flexospan 1/2" wall and roofing panel is our most economical. It's useful for standard
applications which require both durability and economy. We manufacture our roofing and wall products from our stocked, 44" coil width and a 36" width.
|
|
3/4" - Wall Panel and Fastened Roofing
|
Flexospan offers two roofing and wall panels products that are are suitable for projects requiring a cost-effective, yet strong panel. The Flexospan 3/4"
wall panels and roofing panel is an excellent choice for medium-
length spans, or when strength
is important.
|
|
7/8" - Wall Panels and Fastened Roofing
|
Our 7/8" wall and roofing panel is the best choice for projects with large spans, where cost containment is important.
It's useful for roofing applications, since the deeper corrugation of the 7/8" product carries off greater volumes of water.
|
|
FE 66 - Wall Panel |
The FE 66 is a 12"-wide panel, recessed every six inches to provide a shadow
effect.
Flexospan's FE 66
and FE 12 wall panels are among our most versatile.
The two panels can be used alone, or in combination
to create interesting, highly architectural effects. Both panels have
concealed fasteners, reducing the number of through-holes and improving
water tightness. Both can be used with our FL 24 liner panel to obtain U
values as high as 0.65 units.
The FE 12 is a 12"-wide, flush panel, with stiffener ribs. (It is available without the stiffener ribs.) It has a clean, flat appearance. |
|
|
FE 12 - Wall Panel
 |
|
R-Panel - Wall Panel and Through Fastened Roofing
 |
(For roofing, with a purlin bearing leg) This traditional
building panel, available in 26 and 24 gauge, is compatible
with many existing buildings, provides the most economical use of
your dollars. Cost saving and the value of strength that comes
from 80 KSI yield steel make our R-Panel a real value. |
|
|
A-Panel - Wall Panel
 |
An excellent choice for economy and appearance. The combination of
the narrow recessed rib with an architectural indentation creates
interest and beauty where cost is an issue. |
|
|
