|
|
LEED® GREEN BUILDING RATING SYSTEM
PRODUCT DATA SHEET-
Materials & Resources
Credit 4 Recycled Content
Flexospan Roofing and Siding
< Back to Panel
LEED Certification Points....
Flexospan - LEED Points Product Data Sheet
LEED® Green Building Rating
System
New Construction & Major Renovations (LEED) Version v3, April
27, 2009
The following is provided as general
information to assist your LEED project team in better understanding
Flexospan products and the characteristics of our materials that may
contribute towards earning LEED certification of your project.
Because each project has unique circumstances, it is the responsibility
of your project team to determine if your project is eligible for
certification and whether LEED points will be available for the Flexospan
product supplied to your particular project. |
|
NEW BUILDING
CONSTRUCTION AND MAJOR
RENOVATION
|
Materials & Resources:
Flexospan
Roofing & Siding |
|
MATERIALS
& RESOURCES (MR)
Credit 4
Recycled Content 1-2 Possible Points
According to U.S. Green
Building Council® LEED 2009 for New Construction and
Major Renovations, the intent of this credit is “To
increase demand for building products that incorporate
recycled content materials, thereby reducing impacts
resulting from extraction and processing of virgin
materials.” (LEED 2009 for New Construction and Major
Renovations, Page 52).
The steel used in
Flexospan’s panels typically contains an average
post consumer recycled content of 28.9%.
This value is
based on data from the Steel Recycling Institute
publication “Steel Takes LEED® with Recycled Content”
(March 2009). Because of unique project circumstances,
it is the responsibility of your LEED project team to
determine if your project is eligible for certification
and whether Credit 4 for Recycled Content points
will be available for the Flexospan product supplied to
your particular project.
|
|
|
Click on the links below and go to
Flexospan's Product Data Sheets for LEED certification points.
|
Flexospan - LEED Points
Product Data Sheets
LEED Green Building Rating
System
|
|
|
Roofing and
Siding Panels
When you need the most
protection....
Remember the goal is to reduce
Life cycle cost:
- Steel Mills
- Liner Wall Panel For Power Plants
- Paper Mills
- Chemical Processing Plants
- Facility Maintenance
- Foundries And Foundry facilities
- Fertilizer Plants
- Coal Mine Facilities
- Coal Mine Conveyor Covers
- Waste Water Treatment Plants
- .....and much more
|
|
Flexospan's Industrial roofing and siding panels are
manufactured in heavy gauge steel for facility maintenance of
industrial buildings that require special design for corrosive
atmosphere protection, fire resistance walls, noise control and other
unique requirements.
-
Flexshield corrosion resistant finish
- Siliconized Polyester finish
-
Galvalume
-
Galvanized G90
-
Stainless Steel
Gauges
18 ga, 20 ga, 22 ga and 24 ga
Flexospan's Commercial roofing and
siding panels are
manufactured in a large selection of:
-
Standard
and custom colors
-
Flexshield corrosion resistant finish
-
Kynar®/Hylar®
finish
-
Siliconized Polyester finish
-
Radius curved panels
for roofs & walls
-
Mitered corners for horizontal panels
-
Perforated Panels
- .....and much more
Gauges
18 ga, 20 ga, 22 ga and 24 ga |
|
|
|
Purlin and Girt Structural Steel
|
Roll Formed Purlins and Girts
-
Z & C Profiles
-
6", 8", 10", 12"
-
2-1/2", 3-1/2" Flanges
-
Gauges 10, 12, 14, 16....and more
-
Many hole punching patterns
-
Prime Painted, Galvanized, and
Stainless Steel
Important Notice: Many custom cold formed
structural shapes and sizes up to 30' long can be fabricated.
-
Special Eave Struts
-
Custom Depths up to 24"
-
Custom Flange Widths
-
Many Gauges
Please call and find out more...
1-800-245-0396
Roll Formed Sub-Girts
-
1/2", 3/4" ....and more
-
16
Ga, 18 Ga ....and more
Roll Formed Z-Bars
-
1-1/2", 2", 3" ....and more
-
16 Ga, 18 Ga ....and more
|
|
|
|
Type B Steel Deck
- Steel Roof Deck
- Steel Floor Deck
|
Flexospan manufactures Steel Decking - Roof Deck, Composite
Floor Deck and Form Deck. Coil Gauges 22, 20, 18, and 16 are stocked in galvanized
and prime painted steel for quick turnaround. Panels are cut to
customer's lengths.
-
Stainless Steel Deck
-
Galvanized Deck
-
Prime Painted Deck
Gauges
16 ga, 18 ga, 20 ga and 22 ga |
< Back to Panell
|
|
|
